<< | Thread Index | >> ]    [ << | Date Index | >> ]

Subject: ping problems.
From: "Hans E. Kristiansen" <hans,AT,tropic,DOT,net>
Date: Mon, 5 Mar 2001 03:49:33 +0100
In-reply-to: <200103030800.DAA22544@gamera.begeek.com>

The link between a private network, IP 192.168.44.2 and a server on a public
IP address, through to the private IP network behind it,  fails using ping
( after the link as only been kept active with a ping=60 in the
configuration file ).

64 octets from 202.75.1.33: icmp_seq=0 ttl=255 time=3686.9 ms
wrong data byte #0 should be 0x8f but was 0x8c8c f5 a2 3a 16 6f 9 0
        8 9 a b c d e f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20
21 22 23 24 25 26 27
        28 29 2a 2b 2c 2d 2e 2f
64 octets from 202.75.1.33: icmp_seq=1 ttl=255 time=3407.8 ms
wrong data byte #0 should be 0x90 but was 0x8d8d f5 a2 3a 70 6e 9 0
        8 9 a b c d e f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20
21 22 23 24 25 26 27

After four or five of this messages, there are no longer any problems.

Thanks,
Hans E.

----- Original Message -----
From: "Craig Longman" <craigl,AT,begeek,DOT,com>
To: <cipe-l,AT,inka,DOT,de>
Sent: Saturday, March 03, 2001 16:00
Subject: problem with rh-5.2

>
> i have a machine that is still running rh-5.2 that we are reluctant to
> upgrade right now.  i tried to get cipe 1.4.5 running on it ( I had 1.3
> running before ) but can't seem to figure it out.  i used an src.rpm
> available from redhat to compile it, which went great.  it installed,
> but i get the following in the /var/log/message when i try to start it:
>
>
> Mar  2 23:53:32 dev-1 ciped-cb[20598]: CIPE daemon vers 1.4.5 (c) Olaf
> Titz 1996-2000
> Mar  2 23:53:33 dev-1 kernel: cipcb: CIPE driver vers 1.3.0 (c) Olaf
> Titz 1996-1998, 100 channels, debug=1
> Mar  2 23:53:33 dev-1 kernel: cipcb: cipe_alloc_dev 0
> Mar  2 23:53:33 dev-1 kernel: cipcb0: alloc
> Mar  2 23:53:33 dev-1 ciped-cb[20598]: opendev: alloc: Invalid argument
>
> does any one have any suggestions?  i think i would like to use the
> newer 1.4 version rather than have to rollback to the 1.3 again.  and if
> i do have to rollback to 1.3 for this machine, is there any problem
> getting 1.3 to work with the 2.4 kernel?
>
> thanks,
>
> --
>
>     CraigL->Thx();
>     Be Developer ID: 5852
>     Check out <http://www.begeek.com/>!
>
>
>
> --
> Message sent by the cipe-l,AT,inka,DOT,de mailing list.
> Unsubscribe: mail majordomo,AT,inka,DOT,de, "unsubscribe cipe-l" in body
> Other commands available with "help" in body to the same address.
> CIPE info and list archive:
<URL:http://sites.inka.de/~bigred/devel/cipe.html>
>
>





<< | Thread Index | >> ]    [ << | Date Index | >> ]