<< | Thread Index | >> ]    [ << | Date Index | >> ]

Subject: Re: CIPE Linux <-> Win2K
From: Kyle Winters <kyle,AT,ksteam,DOT,com,DOT,au>
Date: Tue, 15 May 2001 05:31:15 +0200
In-reply-to: <5.0.2.1.0.20010515083812.00a13240@192.168.1.1>

Jason,
Don't forget your routing as well.  If you have this setup:

Site 1
Real Public IP 203.111.111.111 / 255.255.255.240
Real Private IP 192.168.1.1 / 255.255.255.0
PTP IP 192.168.200.1 / 255.255.255.0

Site 2
Real Public IP 203.222.222.222 / 255.255.255.240
Real Private IP 192.168.2.1 / 255.255.255.0
PTP IP 192.168.200.2 / 255.255.255.0

then you will need to set up the following routes
Site 1
route add -net 192.168.2.0/24 gw 192.168.200.2

Site 2
route add -net 192.168.1.0/24 gw 192.168.200.1

Also, make sure that if you are running ipchains, you need to allow these 
addresses through without being masqueraded.

Kyle Winters

At 09:43 AM 15/05/01 +1000, Jason wrote:
>Hi,
>
>Thanks for the tip.  My TCP/IP knowledge is a tad weak (obvious).  It's a 
>bit of a pain when my pal has the Win2K version which doesn't have as much 
>flexibility as the Linux one.  I did try PTP net of 192.168.4.x but that 
>didn't work... only because he didn't know where to set the local PTP 
>link.  Anyway, enough excuses.  I'll try again tonight.
>
>Cheers,
>jASON





<< | Thread Index | >> ]    [ << | Date Index | >> ]