<< | Thread Index | >> ]    [ << | Date Index | >> ]

Subject: CIPE-Win32 routing guestion
From: Jari Meklin <jmeklin,AT,masto,DOT,uku,DOT,fi>
Date: Mon, 27 Aug 2001 11:02:22 +0200

Hi,

I am having a simple cipe connection between two WinNT-hosts (or should I
say routers, because there is no underlying net), one at my home and
one at my school. With no much experience with the routing issues I found
it hard to figure the correct routing. With Linux config I only had to add
one route command with each host:

For the 10.20.30.1 host: 
route add -net 10.20.20.0 netmask 255.255.255.0 gw 10.20.30.1

and for the 10.20.20.1 host:
route add -net 10.20.30.0 netmask 255.255.255.0 gw 10.20.20.1

I simply tried to do the same with NT-boxes with no luck at all.
While pinging the hosts (routers) I get "request timed out" error.

Now I am turning to this cipe-l with a request to help me. The
other host's routing table follows.

at 10.20.30.1:
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 e0 29 11 58 ae ...... DEC DC21041 PCI Ethernet Adapter
0x3 ...08 00 58 00 00 01 ...... DKW Heavy Industries VPN Adapter.
===========================================================================
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0         real__gw       real___ip       1
          0.0.0.0          0.0.0.0       10.20.20.1      10.20.30.1       1
         real_net    255.255.255.0        real___ip       real___ip       1
        real___ip  255.255.255.255        127.0.0.1       127.0.0.1       1
       10.20.20.0    255.255.255.0       10.20.30.1      10.20.30.1       1
       10.20.30.0    255.255.255.0       10.20.30.1      10.20.30.1       1
       10.20.30.1  255.255.255.255        127.0.0.1       127.0.0.1       1
   10.255.255.255  255.255.255.255        real___ip       real___ip       1
        127.0.0.0        255.0.0.0        127.0.0.1       127.0.0.1       1
        224.0.0.0        224.0.0.0        real___ip       real___ip       1
        224.0.0.0        224.0.0.0       10.20.30.1      10.20.30.1       1
  255.255.255.255  255.255.255.255        real___ip       real___ip       1
===========================================================================

So - what seems to be the problem with my routing table?

(Comment: real__ip is not really real. I am using an adsl-connection.)

Jari
 





<< | Thread Index | >> ]    [ << | Date Index | >> ]