<< | Thread Index | >> ]    [ << | Date Index | >> ]

Subject: RE: cipe-win32 setup
From: Paul Hamm <paulhamm,AT,OpenRatings,DOT,com>
Date: Sat, 13 Apr 2002 14:08:09 +0200

Yes you will need to add routing commands.  Sorry not sure how you would do
that in Windows on linux the commands I use with the ips below would look
like this

left server
route add -net 10.0.0.0 netmask 255.255.255.0 cipcb0
route add -net 192.168.1.0 netmask 255.255.255.0 gw 10.0.0.2

right server
route add -net 10.0.0.0 netmask 255.255.255.0 cipcb0
route add -net 192.168.0.0 netmask 255.255.255.0 gw 10.0.0.1

You need to configure NBNS/WINS to cross browse your network segments.
Though using the ips of your machines should work fine.  See the samba
documentation, BROWSER.tct,on how to configure Browsing across subnets, it
tells you how this process works and does not require samba or linux.  This
makes finding windows machines easier.  You should see all your machines in
the My Network Places list.

-----Original Message-----
From: Thomas Schaefer [mailto:mail,AT,thomas--schaefer,DOT,de
Sent: Saturday, April 13, 2002 7:03 AM
To: Martin Flatz
Cc: cipe-l,AT,inka,DOT,de
Subject: Re: cipe-win32 setup

...
 Can i install it one the 2 servers and
 do i have to add some routes.
...

Thats the answer to your question. Unfortanetely the MS-ICS forces you to
use 
the same networks on both ends. 
I don't know if you want play and surf at the same time. If so you have to 
add carefully hostroutes trough your tunnel. A better way would be to use 
different private networks. 

Here an example I would try:
Whereby 10.0.0.1 is the tunnelnetwork. XXX.XXX.XXX.XXX and xxx.xxx.xxx.xxx 
are your official ip-addresses.

        10.0.0.1 - - - - - - - - - - - - - - - - - - -10.0.0.2
192.168.0.1/XXX.XXX.XXX.XXX----------------xxx.xxx.xxx.xxx/192.168.1.1
      |                                                         |   
192.168.0.2                                                192.168.1.2   
     .                                                          .
     .                                                          . 
192.168.0.x                                                192.168.1.x 

On the left machines you have to add 192.168.1.0/24 with nexthop
192.168.0.1. 
On 192.168.0.1 of course with nexthop 10.0.0.2. 
On the right machines 192.168.0.0/24 with nexthop 192.168.1.0/24.
And on 192.168.1.1 with nexthop 10.0.0.1.

I am not a total windows freak. May be you have enable the routing flag. On 
windows NT it is hidden very well. 

Regards,
Thomas

 

--
Message sent by the cipe-l,AT,inka,DOT,de mailing list.
Unsubscribe: mail majordomo,AT,inka,DOT,de, "unsubscribe cipe-l" in body
Other commands available with "help" in body to the same address.
CIPE info and list archive:
<URL:http://sites.inka.de/~bigred/devel/cipe.html>





<< | Thread Index | >> ]    [ << | Date Index | >> ]