<< | Thread Index | >> ]    [ << | Date Index | >> ]

To: "'cipe-l,AT,inka,DOT,de'" <cipe-l,AT,inka,DOT,de>
Subject: FW: Help on connecting WIN2k workstation to Cipe VPN server on Linux
From: Doug Johnson <doug.johnson,AT,vifanusa,DOT,com>
Date: Fri, 27 Jun 2003 14:06:44 -0400

The first one for some reason didn't post. So, let me try it again.  Please
forgive me if two of these show up... 

> Hey gang! I currently have 2 networks connected by a CIPE VPN and it works
> quiet well (except for a few small issues with MASQUERADE drops in
> IPTABLES which I am still dealing with). I am wanting to connect a WIN2K
> Pro workstation to the VPN as well and am having a few problems.  I have
> installed the windoze CIPE client on the workstation. Here is its config:
> 
> #########################################
> 
> In the adapter settings of the Win2k box:
> IP Address: 10.1.0.3  (I am assuming that I am using the IP of the virtual
> adapter of the local machine here)
> Subnet Mask: 255.255.255.0
> Default Gateway: (blank)
> 
> DNS Server entries are both blank as well.
> 
> In the CIPE Peer setting I have the following info:
> Local IP Addres: 0.0.0.0 Port 6849 (I used to use 51000 but the vin client
> would not accept over 4 in this field)
> Peer IP Address: 66.43.188.40 Port 6849
> Local PTP Address:10.1.0.3
> Remote PTP Address: 10.1.0.1 
> Status Enabled: (checked)
> Static Key - Matched Exactly to the server - Hidden here to protect the
> tempted :)
> Cipher: Blowfish
> Timeout seconds: 600
> 
> #############################################
> 
> The CIPE server 
> options.cipcb0 file:
> 
> dynip
> cttl 64
> maxerr -1
> ptpaddr 10.1.0.2 (This is for the other always up connected LAN - maybe a
> problem here)
> ipaddr 10.1.0.1
> me vpn.vifanusa.com:6849
> peer 0.0.0.0
> key (once again hidden, sorry)
> 
> ifcfg-cipcb0 file:
> 
> USERCTL=no
> PEERDNS=no
> TYPE=CIPE
> DEVICE=cipcb0
> ONBOOT=yes
> IPADDR=10.1.0.1
> MYPORT=6849
> PTPADDR=10.1.0.2  (This is for the other always up connected LAN - maybe a
> problem here)
> 
> ################################################
> 
> The laptop that I am trying to install this adapter on has three ways to
> connect to the Internet.
> 1. Ethernet (Here I do not need the Cipe client since they are locally
> connected at that time
> 2. WiFi 802.11b ( I need it here but I don't think it uses a NDIS standard
> adpater for this. We have had other problems with other VPN softwares
> because of the NDIS compatiable issues.
> 3. Dial-up through a PCS phone. This connection takes place after the user
> has logged into the WIN2k laptop. I am not sure if it makes a difference
> here.
> 
> 
> My questions are as follows:
>       Do I have something incorrect in my configs?
>       Are there issues with the type of connections I am trying to
> establish?
>       Can I use one server for multiple type of connections (dedicated LAN
> and roaming clients)?
> 
> Thanks much in advance...
> Doug 


<< | Thread Index | >> ]    [ << | Date Index | >> ]