<< | Thread Index | >> ]    [ << | Date Index | >> ]

To: "'cipe-l,AT,inka,DOT,de'" <cipe-l,AT,inka,DOT,de>
Subject: RE: Help on connecting WIN2k workstation to Cipe VPN server on Li nux
From: Doug Johnson <doug.johnson,AT,vifanusa,DOT,com>
Date: Fri, 27 Jun 2003 22:25:35 -0400

Thanks Artem! That worked.. For some reason I was under the assumption that
multiple machines could use the same adapter.  That is what I get for
assuming.  Thanks again.

Doug

-----Original Message-----
From: Artem Dmytrenko [mailto:admytren,AT,internet2,DOT,edu
Sent: Friday, June 27, 2003 5:34 PM
To: Doug Johnson; 'cipe-l,AT,inka,DOT,de'
Subject: RE: Help on connecting WIN2k workstation to Cipe VPN server on
Li nux

I think your problem is that you're trying to connect two different machines
to the same cipe adapter. On your server, you should create separate adapter
for each connection.

At 04:13 PM 6/27/2003 -0400, Doug Johnson wrote:
>I have found that the console does connect for the problem below.
Therefore
>I have a few routing problems to solve.  I do have a question on why (when
>connected) my messages file on the Linux machine shows each VPN client
>constantly re-establishing the connection:
>
>Jun 27 15:49:35 linus kernel: cipcb0: new peer 68.118.80.170:6849
>Jun 27 15:49:43 linus kernel: cipcb0: new peer 68.26.201.109:6849
>Jun 27 15:49:57 linus kernel: cipcb0: new peer 68.118.80.170:6849
>Jun 27 15:50:07 linus kernel: cipcb0: new peer 68.26.201.109:6849
>Jun 27 15:50:17 linus kernel: cipcb0: new peer 68.118.80.170:6849
>.......
>
>This looks to me a config issue and I am sort of lost. I found only 1
>reference in the archives but no answer. The connections do not seem to
drop
>but I don't notice it. Any info would be appreciated.
>
>Doug
>
>
>-----Original Message-----
>From: Doug Johnson [mailto:doug.johnson,AT,vifanusa,DOT,com
>Sent: Friday, June 27, 2003 2:07 PM
>To: 'cipe-l,AT,inka,DOT,de'
>Subject: FW: Help on connecting WIN2k workstation to Cipe VPN server on
>Li nux
>
>
>The first one for some reason didn't post. So, let me try it again.  Please
>forgive me if two of these show up...
>
> > Hey gang! I currently have 2 networks connected by a CIPE VPN and it
works
> > quiet well (except for a few small issues with MASQUERADE drops in
> > IPTABLES which I am still dealing with). I am wanting to connect a WIN2K
> > Pro workstation to the VPN as well and am having a few problems.  I have
> > installed the windoze CIPE client on the workstation. Here is its
config:
> >
> > #########################################
> >
> > In the adapter settings of the Win2k box:
> > IP Address: 10.1.0.3  (I am assuming that I am using the IP of the
virtual
> > adapter of the local machine here)
> > Subnet Mask: 255.255.255.0
> > Default Gateway: (blank)
> >
> > DNS Server entries are both blank as well.
> >
> > In the CIPE Peer setting I have the following info:
> > Local IP Addres: 0.0.0.0 Port 6849 (I used to use 51000 but the vin
client
> > would not accept over 4 in this field)
> > Peer IP Address: 66.43.188.40 Port 6849
> > Local PTP Address:10.1.0.3
> > Remote PTP Address: 10.1.0.1
> > Status Enabled: (checked)
> > Static Key - Matched Exactly to the server - Hidden here to protect the
> > tempted :)
> > Cipher: Blowfish
> > Timeout seconds: 600
> >
> > #############################################
> >
> > The CIPE server
> > options.cipcb0 file:
> >
> > dynip
> > cttl 64
> > maxerr -1
> > ptpaddr 10.1.0.2 (This is for the other always up connected LAN - maybe
a
> > problem here)
> > ipaddr 10.1.0.1
> > me vpn.vifanusa.com:6849
> > peer 0.0.0.0
> > key (once again hidden, sorry)
> >
> > ifcfg-cipcb0 file:
> >
> > USERCTL=no
> > PEERDNS=no
> > TYPE=CIPE
> > DEVICE=cipcb0
> > ONBOOT=yes
> > IPADDR=10.1.0.1
> > MYPORT=6849
> > PTPADDR=10.1.0.2  (This is for the other always up connected LAN - maybe
a
> > problem here)
> >
> > ################################################
> >
> > The laptop that I am trying to install this adapter on has three ways to
> > connect to the Internet.
> > 1. Ethernet (Here I do not need the Cipe client since they are locally
> > connected at that time
> > 2. WiFi 802.11b ( I need it here but I don't think it uses a NDIS
standard
> > adpater for this. We have had other problems with other VPN softwares
> > because of the NDIS compatiable issues.
> > 3. Dial-up through a PCS phone. This connection takes place after the
user
> > has logged into the WIN2k laptop. I am not sure if it makes a difference
> > here.
> >
> >
> > My questions are as follows:
> >       Do I have something incorrect in my configs?
> >       Are there issues with the type of connections I am trying to
> > establish?
> >       Can I use one server for multiple type of connections (dedicated
LAN
> > and roaming clients)?
> >
> > Thanks much in advance...
> > Doug
>
>--
>Message sent by the cipe-l,AT,inka,DOT,de mailing list.
>Unsubscribe: mail majordomo,AT,inka,DOT,de, "unsubscribe cipe-l" in body
>Other commands available with "help" in body to the same address.
>CIPE info and list archive:
><URL:http://sites.inka.de/~bigred/devel/cipe.html>
>
>--
>Message sent by the cipe-l,AT,inka,DOT,de mailing list.
>Unsubscribe: mail majordomo,AT,inka,DOT,de, "unsubscribe cipe-l" in body
>Other commands available with "help" in body to the same address.
>CIPE info and list archive:
<URL:http://sites.inka.de/~bigred/devel/cipe.html>


<< | Thread Index | >> ]    [ << | Date Index | >> ]