<< | Thread Index | >> ]    [ << | Date Index | >> ]

To: Zkoumalek <zkoumalek,AT,seznam,DOT,cz>
Subject: Re: CIPE RH linux + Windows 2000 routing problem
From: Phil Scarratt <fil,AT,draxsen,DOT,com>
Date: Fri, 19 Sep 2003 20:12:30 +1000
Cc: cipe-l,AT,inka,DOT,de
In-reply-to: <78842.184180-9187-10518844-1063964175@seznam.cz>
Organization: Draxsen Technologies
References: <78842.184180-9187-10518844-1063964175@seznam.cz>

Zkoumalek wrote:

Hello,

I am making CIPE VPN tunel and I want add one Win 2000 computer with public IP address into our company's LAN. We have RH linux 7.1 as router where we are runing CIPE 1.4.5. On another machine is Windows 2000 SP 4 installed and there is CIPE-Win32 version 2.0-pre15. My tunnel works fine, I think - I can ping left and right end of tunnel from Linux (ping 192.168.3.1)and Windows (ping 192.168.1.2)too. But I can´t ping on another machine inside my network (ie. 192.168.1.15) or inner interface in my linux router (ping 192.168.1.1). I tested packets with tcpdump and ping and packets from RH linux router goes into tunel fine, but ICMP requests from Win 2000 aren't coming back.

Can anybody help me?

Thank you very much.
T. Zkoumalek

My setup is:
router (ifcfg-cipcb0):
DEVICE=cipcb0
ONBOOT=no
USERCTL=yes
MYPORT=5000
PEER=win2000.public.ip:5000
ME=rh-linux.public.ip:5000
PTPADDR=192.168.3.1
IPADDR=192.168.1.2
PING=5
route add -net 192.168.3.0 netmask 255.255.255.0 dev cipcb0

routeru's interfaces:
eth0:rh-linux.public.ip
eth1:192.168.1.1
cipcb0:   Link encap:IPIP Tunnel  HWaddr
inet addr:192.168.1.2  P-t-P:192.168.3.1  Mask:255.255.255.255
UP POINTOPOINT NOTRAILERS RUNNING NOARP  MTU:1442  Metric:1

Win2000 (CIPE Win32):
Local IP address: win2000.public.ip:5000
Peer IP address: rh-linux.public.ip:5000
Local PTP address: 192.168.3.1
Peer PTP address: 192.168.1.2
route add 192.168.1.0 mask 255.255.255.0 192.168.3.1 metric 1 if 2

Win 2000's interfaces:
1. win2000.public.ip
2. 192.168.3.1 (CIPE Win32 interface)


Does the route add command on the win2k machine work? Double check it with "route print". I think windows does not like adding a route whose gateway and interface are not on the same subnet.


Fil

--
Phil Scarratt
Draxsen Technologies
IT Contractor
0403 53 12 71


<< | Thread Index | >> ]    [ << | Date Index | >> ]